Swimming
Pool Deck Coatings - Patio Tones
We
offer a complete line of automatic swimming pool cleaners and parts, from
all the major manufactures. Sta-Rite, Arneson, Jandy,
Hayward, Baracuda, Letro, Kreepy Krauly and many more. Whether its
a single part or a complete swimming pool cleaner, we can supply your
needs.
Click
here to return to Maitneance Items
Patio
Tones Will
convert worn shappy and coplorless pool decks into beautiful recreational
area. Both new and Old decks will be more attractive and safe with this
easy to use, slip resitant coating.
Cracks,
pits or breaks in the concrete can be patched and then painted with Patio
Tones to restore the original beauty of your pool deck or patio.
Patio
Tones can be rolled on wet surfaces and cleans with water.
All
concrete surfaces must be properly cleaned prior to the application of
PAtio tones. After sweeping away loose debris, use a stiff bristle patio
broom to scrub the surface with a solutioon of Tri-Sodium Phosphase and
water. This will remove sun tan lotion and oils which inhibit the penetration
of Patio tones. The surface should be throughly rinsed with water. Using
a 10% soultion of Muriatic acid, scrub the deck again, this will remove
mineral deposits and creates pores for be adhesion of the PAtio Tones
paint. Finally use Tri-sodium Phosphate solution to neutralize any traces
of acid, rinse and allow standing water to dissipate.
Patio
Tones may be rolled on wet concrete, but not through standing water or
puddles. Two coats are required on bare concrete. The afirst coat should
be thinned with 10-20% water.(if concrete is wet omit thining). Allow
the first coat to dry a miniumum of one hour depending on the temperature.
Apply the second coat full strength. ALLOW 24 hours to dry before allowing
traffic to walk on the coating.
Coverage: 80-120
square feet per gallon depending on the surface prorosity. Two coats are
require on bare concrete.
|
